The final result shown above.
The two pictures above are taken just a few minutes after finishing the second channel. I connected bot monoblocks to the preamp and two small surround speakers and let it play for a few hours on the terrace.
The next morning I took the amps outside for a few additional pictures. I particularly like both pictures since they really show how beautiful the combination is. Early sunlight does the rest.
After finishing a project, I normally judge the sound based on a primitive test setup. After a few days, I want to listen to a project for alonger time, which means I want my B&W vision test speakers, some well known cd's and a few hours time before I know for sure that it "works".
After a few days I hooked up the set in my living room together with the Sony SACD player scd-940.
For those that read about the set in my living room: No, i do not the amp to my Cremona speakers as the amps do not contain any protection circuit. I simply do not take the risk (period).
| << Page 1: Introduction << Page 2: Construction |
^^ Back to DIY Page ^^
|
